Master Of All Hacking Warez...!!!
If you’ve got a netbook with really great battery life, you’ll probably still have loads of time left even with only 10% of the battery remaining. Here’s how to tweak the settings so it alerts you or goes into sleep mode at a more reasonable time.
Note: obviously if you don’t have a great battery in your laptop, you should probably be careful with these settings or you might lose data. If anything, you’d be better off making the notifications happen sooner in that case.
You’ll want to start by heading into Power Options from the Control Panel, or more easily, by just clicking on the power icon in the tray and going to More Power Options. Once you’re there, you can tweak the current plan by clicking the “Change plan settings” link.
Next you’ll want to click the “Change advanced power settings” link at the bottom of that dialog.
Now find the option for Battery at the bottom of the dialog and expand it until you find the various settings for Critical, Low, or Reserve battery levels.
Here’s how the different levels work:
You can customize any of the levels here, and you can even disable the notification entirely if you want.
Many MacBook Air users with Windows 7 running, have adjusted the Critical Battery Action to Sleep Mode instead, and changed the low battery notification down a bit. That’s mostly because MacBook have got great battery life, and they always plug it in quickly once the battery dies.
zdnet.com/* cnet.com/* dpreview.com/* consumersearch.com/* wikipedia.org/* time.com/* pcworld.com/* youtube.com/* nytimes.com/* | gizmondo.com/* engadget.com/* technologyreview.com/* mobile-review.com/* notebookreview.com/* arstechnica.com/* bbc.co.uk/* hardwareanalysis.com/* borntohack.tk |
Within seconds, you are prompted to save your newly encrypted PDF. By default, the program just adds .protected after the original file name.
PDFProtect is one of the fastest, easiest ways we have found to encrypt a PDF. While no encryption is fool proof, PDFProtect’s seems on par with that built into Adobe. The site is definitely worth a bookmark for those who use PDFs on a regular basis.
Anytime somebody has hard drive errors, I always recommend that they run . Here’s a full guide to using the Check Disk feature built into every version of Windows.
The chkdsk or “Check Disk” utility is used in Windows to scan through your entire hard drive and find problems… it’s like a lot like doing inventory… it’s boring, but it has to be done sometimes. I recommend that you run through a check disk every month or two.
Open up Computer and then right-click on the drive you want to check, and choose Properties, or just click the drive, and then click the Properties button.
Then select the Tools tab, and click the “Check Now” button.
A little dialog will pop up to allow you to choose the options you want for the disk check. You should check both options if you want to really check the disk properly, but if you just want to do a quick check you could select only the first one.
The only problem with that is that Windows can’t check a drive that’s being used, such as the system drive, but Windows will let you schedule a disk check for the next reboot.
You should keep in mind that running through a full check disk takes quite a while, sometimes hours depending on how big the drive is and how many files you have.
If you had scheduled a disk check but decided you would like to cancel it, you can run a command to
Open up an administrator mode command prompt by right-clicking on the item in the start menu and choosing “Run as Administrator”. Type in the following command, substituting the drive letter if necessary.
chkntfs /x c:
Seems like they could have a better command line output… something like “canceled!” would have even worked… oh well.
Open an admin mode command prompt, and then type in the following command:
chkntfs c:
Sometimes if your computer has not shut down correctly, Windows will mark the drive as “dirty” basically as a reminder to itself that the drive probably has filesystem errors and should be checked. When the flag is set, you’ll be told the disk requires checking during the next bootup.
You can easily see the state of this flag by using two different command line options. The first is the same command as above, but you can see the output is different if the drive is set to be automatically checked.
chkntfs c:
You could also use this command to just query the dirty bit:
fsutil dirty query c:
Open up an administrator mode command prompt, and then type in the following command to do an exhaustive check of your drive. Substitute C: for whatever drive you want to check.
chkdsk /f /r C:
If the drive is a system drive or has files in use, you’ll be asked to schedule the check for the next reboot:
The above command is the recommended way to perform a disk check, but if you want to do a less exhaustive check, you could remove the /R option from the command.
Here’s the full list of parameters for your geeky enjoyment:
C:\>chkdsk /?
Checks a disk and displays a status report.
CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B]
volume Specifies the drive letter (followed by a colon),
mount point, or volume name.
filename FAT/FAT32 only: Specifies the files to check for fragmentation.
/F Fixes errors on the disk.
/V On FAT/FAT32: Displays the full path and name of every file
on the disk.
On NTFS: Displays cleanup messages if any.
/R Locates bad sectors and recovers readable information
(implies /F).
/L:size NTFS only: Changes the log file size to the specified number
of kilobytes. If size is not specified, displays current
size.
/X Forces the volume to dismount first if necessary.
All opened handles to the volume would then be invalid
(implies /F).
/I NTFS only: Performs a less vigorous check of index entries.
/C NTFS only: Skips checking of cycles within the folder
structure.
/B NTFS only: Re-evaluates bad clusters on the volume
(implies /R)
The /I or /C switch reduces the amount of time required to run Chkdsk by
skipping certain checks of the volume.
Note: You’ll probably notice that this guide was originally written a few years ago. We’ve updated it for Windows 7 and are republishing it for all the readers that might have missed it the first time.
You can also use chkdsk on Windows XP as well, but some of the options are slightly different. In general, it works the same way.
Since all your friends are going to read it the only person hurt would be you.It is very irritating and sometime embarrassing when you have a fight with someone on the social network, he might be a real creep and upload some real nasty comments onto your pictures or statuses or profile updates.
Microsoft Corp., the world’s largest software maker, will announce a version of its Windows computer operating system that runs on ARM Holdings Plc technology for the first time, said two people familiar with Microsoft’s plans.
The new product will debut at the Consumer Electronics Show in January, said the people, who asked not to be identified because Microsoft’s plans are confidential. The software would be tailored for battery-powered devices, such as tablet computers and other handhelds, the people said.
The operating system would give Microsoft another way to attack the market for tablets and phones, where it’s lost ground to Apple Inc. and Google Inc. ARM chips -- made by Qualcomm Inc., Texas Instruments Inc. and Samsung Electronics Co. -- are used in most smartphones, as well as Apple’s best-selling iPad.
A full-featured version of Windows for ARM chips is the best way for Microsoft to make a dent in the iPad’s lead, said Robert Breza, a Minneapolis-based analyst for RBC Capital Markets. While Windows is dominant in the personal-computer market, it hasn’t parlayed that into tablet success yet.
“They’ve got to come back with a product that’s better than ‘me too’ and is equal if not better in features,” Breza said. He has an “outperform” rating on Microsoft’s stock, which he doesn’t own. “A lot oftablets today are inferior to PCs.”
ARM Climbs
Microsoft rose 26 cents to $28.07 at 4 p.m. New York time in Nasdaq Stock Market trading. The stock has lost 7.9 percent this year. ARM’s U.S.-traded shares, which have more than doubled in value this year, climbed 6.6 percent to $19.78.
The new software also will be able to work on Intel Corp. and Advanced Micro Devices Inc. processors -- the chips that power PC versions of Windows. While other versions of Microsoft software aimed at phones and mobile devices work on ARM chips, this is the first time it will make a full version of Windows available on that technology.
Intel is trying to make its own forays into tablets and smartphones, squaring off against ARM’s technology. ARM, based in Cambridge, England, sells the rights to use its patents and chip designs and doesn’t manufacture the electronic components.
Bill Cox, a spokesman for Redmond, Washington-based Microsoft, declined to comment. Charlene Marini, a California- based spokeswoman for ARM, said the company doesn’t comment on rumor or speculation. Tom Beermann, at Santa Clara, California- based Intel, also declined to comment.
Apple sold 7.46 million iPads from the product’s April debut through September. The device accounted for 95 percent of the tablet market last quarter, according to Strategy Analytics.
Microsoft may be able to win 10 percent to 20 percent of the as many as 50 million tablets that will be sold next year, Breza estimates. He predicted that Windows tablets will be cheaper than the iPad.
All Rights Reserved. http://borntohack.in Designed By Shaify Mehta